Swisstronik v8 Testnet

Upgrade plan for v1.0.8

Upcoming v1.0.8 upgrade contains the following:

• Add explicit checks for RA Quote

• Add migration for updated power reduction

• Use previous cosmos sdk to re-enable delegation

• Make ecrecover precompile work the same as go-ethereum

• Add check of transaction / call sender in enclave

• Allow unsigned calls for eth_estimateGas

• Minor bug fixes

Backup

Prior to the upgrade, validators are encouraged to take a full data snapshot. Snapshotting depends heavily on infrastructure, but generally this can be done by backing up the .swisstronik directory. If you use Cosmovisor to upgrade, by default, Cosmovisor will backup your data upon upgrade. See below upgrade by cosmovisor section.

It is critically important for validator operators to back-up the .swisstronik/data/priv_validator_state.json file after stopping the swisstronikd process. This file is updated every block as your validator participates in consensus rounds. It is a critical file needed to prevent double-signing, in case the upgrade fails and the previous chain needs to be restarted.

Manually

If you're not using cosmovisor, you can perform the upgrade manually.

Prepare new binary

Download new binary:

wget https://github.com/SigmaGmbH/swisstronik-chain/releases/download/testnet-v1.0.8/swisstronikd.zip

Extract downloaded archive:

unzip swisstronikd.zip

Please, ensure that downloaded swisstronikd binary has 955f02ba4058a8f7cdc1dd4cc376b6ad7a7b52e5 commit. You can check it by running swisstronikd version --long.

In bin folder you will be able to find required files.

Copy libsgx_wrapper_v1.0.8.x86_64.so lib:

sudo cp bin/libsgx_wrapper_v1.0.8.x86_64.so /usr/lib

Copy v1.0.8_enclave.signed.so to ENCLAVE_HOME directory (by default it is $HOME/.swisstronik-enclave):

cp bin/v1.0.8_enclave.signed.so $ENCLAVE_HOME

DURING UPGRADE: Modify your .service file

Once your validator reach upgrade height, it will stop produce new blocks automatically. After your node stopped, switch the binary you're using to swisstronikd v1.0.8 at ExecStart in your .service file.

NOTE: swisstronikd v1.0.8 is located in bin folder from previous step with unpacking .zip archive.

Then run:

sudo systemctl daemon-reload

Then you should restart your validator

Using cosmovisor

If you're running your node using cosmovisor, please follow next steps.

Download binaries

Download new binary:

wget https://github.com/SigmaGmbH/swisstronik-chain/releases/download/testnet-v1.0.8/swisstronikd.zip

Extract downloaded archive:

unzip swisstronikd.zip

Please, ensure that downloaded swisstronikd binary has 955f02ba4058a8f7cdc1dd4cc376b6ad7a7b52e5 commit. You can check it by running swisstronikd version --long.

In bin folder you will be able to find required files.

Copy libsgx_wrapper_v1.0.8.x86_64.so lib:

sudo cp bin/libsgx_wrapper_v1.0.8.x86_64.so /usr/lib

Copy v1.0.8_enclave.signed.so to ENCLAVE_HOME directory (by default it is $HOME/.swisstronik-enclave):

cp bin/v1.0.8_enclave.signed.so $ENCLAVE_HOME

Setup cosmovisor

If you haven't configured cosmovisor before, do the following steps.

Install the latest version of Cosmovisor (1.5.0):

go install cosmossdk.io/tools/cosmovisor/cmd/cosmovisor@latest
cosmovisor version
# cosmovisor version: v1.5.0

Copy old swisstronikd binary:

cp $(whereis swisstronikd) .

Initialize cosmovisor:

export DAEMON_HOME=/path/to/.swisstronik
export DAEMON_NAME=swisstronikd

cosmovisor init swisstronikd

Put v1.0.8 binaries

Copy swisstronikd v1.0.8 to $HOME/.swisstronik/cosmovisor/upgrades/v1.0.8/bin

mkdir -p  $HOME/.swisstronik/cosmovisor/upgrades/v1.0.8/bin
cp swisstronikd $HOME/.swisstronik/cosmovisor/upgrades/v1.0.8/bin

NOTE: swisstronikd v1.0.8 is located in bin folder from previous step with unpacking .zip archive.

Please, ensure that downloaded swisstronikd binary has 955f02ba4058a8f7cdc1dd4cc376b6ad7a7b52e5 commit. You can check it by running swisstronikd version --long.

Check folder structure

At this moment, you should have the following structure:

.
├── current -> genesis or upgrades/<name>
├── genesis
│   └── bin
│       └── swisstronikd  # old: v1.0.7
└── upgrades
    └── v1.0.8
        └── bin
            └── swisstronikd  # new: v1.0.8

Export the environmental variables:

export DAEMON_NAME=swisstronikd
# please change to your own swisstronik home dir
# please note `DAEMON_HOME` has to be absolute path
export DAEMON_HOME=$HOME/.swisstronik
export DAEMON_RESTART_AFTER_UPGRADE=true

Disable auto downloading of binaries

Set DAEMON_ALLOW_DOWNLOAD_BINARIES to false to avoid cosmovisor trying to download binaries.

Start the node

Start the node:

cosmovisor run start --x-crisis-skip-assert-invariants --home $DAEMON_HOME

Skipping the invariant checks is strongly encouraged since it decreases the upgrade time significantly and since there are some other improvements coming to the crisis module in the next release of the Cosmos SDK.